86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Zidong pump co***ny

Products >> Horizontal agricultural using mixed flow pump

Horizontal agricultural using mixed flow pump

Build Your Online Product Catalogs?



Description
Product Name: Horizontal agricultural using mixed flow pump
Supply Ability: 6000 set
Related proudcts horizontal pump, mixed flow pump, agricultural pump,
Specifications standard
Price Term: FOB
Port of loading: Shanghai
Minimum Order 1 set
Unit Price: 400

HW pumps are horizontal, single stage, single suction, volute type mixed flow pump. Simple, reliable, easy fitting, and high efficiency, small size and light weight.
Applies to transport water or other liquids physical and chemical properties similar to water. Temperature of transmission fluid is not higher than 50 degrees. Widely
used in agricultural irrigation, industrial and urban water supply and drainage and other occassions.

pumps technical parameter:
1. capacity: 137-9000 m3/h
2. head: 2-62.7 m
3. speed: 970 RPM, 1180 RPM,1450 RPM,2900 RPM etc

Main Feature :
stable working , convenient to maintenance ,high efficiency ,light weight ,small volume .
Structure features
1. HW pump combines the pump cover, impeller, shaft, bushings and bearings and other major components. See chart
2. Pump cover connects to pump and inlet respectively. There should be adequate clearance between plane and the impeller pump cover. Gap is too small, will cause
friction; gap is too large, will lead to a lot of pressure water pump body back, so that reduce the pump efficiency. Actual appropriate clearance is 0.3 ~ 0.7mm (the
shaft into the pump inlet), the gap can be adjusted by changing the paper pad thickness.
3. Seal device consists of packing, packing gland, packing ring, and pump the fill ring. Its role is to prevent air suction pump and to prevent excessive water flow out
from the pump along the axial.
4. Axil sleeve is to protect the shaft. Timely replacement after worn.
5. Shaft is beared by single row radial ball bearing. Lubricating oil can be used on bearings - oil should be controlled between the lines marking on the oil benchmark;also grease can be used - can be added in the pump assembly. Supplement it during removing front cover and back cover.
6. The screw hole on the top of the pump is used for irrigation water or added water through connection of vacuum pump.
7. To expand the use of pumps to meet different requirements of users, can cut impeller (pump model is indicated by addition suffix

Contact Us
Company: Zidong pump co***ny
Contact: Ms. Tina Wu
Address: NO 106, Yuhua East Road,Yuhua District,Shijiazhuang City, Hebei Province, China
Postcode: 050000
Tel: 86 311 80796266
Fax: 86 311 66792059
E-mail:         


Copyright© Zidong pump co***ny All Rights Reserved.
Tel : 86 311 80796266 Fax : 86 311 66792059
Powered by 86exporter.com