|
Build Your Online Product Catalogs?
Product Name: |
Cast iron industrial mixed flow pump
|
Supply Ability: |
6000 SETS |
Related proudcts |
industrial pump, cast iron pump, mixed flow pump, |
Specifications |
standard |
Price Term: |
CNF |
Port of loading: |
Shanghai |
Minimum Order |
1 SET |
Unit Price: |
922 SETS |
|
Pump overview HW pumps are horizontal, single stage, single suction, volute type mixed flow pump. Simple, reliable, easy fitting, and high efficiency, small size and light weight.Applies to transport water or other liquids physical and chemical properties similar to water. Temperature of transmission fluid is not higher than 50 degrees. Widely used in agricultural irrigation, industrial and urban water supply and drainage and other occassions.
pumps technical parameter: 1. capacity: 137-9000 m3/h 2. head: 2-62.7 m 3. speed: 970 RPM, 1180 RPM,1450 RPM,2900 RPM etc
Main Feature : stable working , convenient to maintenance , high efficiency ,light weight , small volume .
Structure features 1. HW pump combines the pump cover, impeller, shaft, bushings and bearings and other major components. See chart 2. Pump cover connects to pump and inlet respectively. There should be adequate clearance between plane and the impeller pump cover. Gap is too small, will cause friction; gap is too large, will lead to a lot of pressure water pump body back, so that reduce the pump efficiency. Actual appropriate clearance is 0.3 ~ 0.7mm (the shaft into the pump inlet), the gap can be adjusted by changing the paper pad thickness. 3. Seal device consists of packing, packing gland, packing ring, and pump the fill ring. Its role is to prevent air suction pump and to prevent excessive water flow out from the pump along the axial. 4. Axil sleeve is to protect the shaft. Timely replacement after worn. 5. Shaft is beared by single row radial ball bearing. Lubricating oil can be used on bearings - oil should be controlled between the lines marking on the oil benchmark;also grease can be used - can be added in the pump assembly. Supplement it during removing front cover and back cover. 6. The screw hole on the top of the pump is used for irrigation water or added water through connection of vacuum pump. 7. To expand th |
Company: |
Zidong pump co***ny
|
Contact: |
Ms. Tina Wu |
Address: |
NO 106, Yuhua East Road,Yuhua District,Shijiazhuang City, Hebei Province, China |
Postcode: |
050000 |
Tel: |
86 311 80796266 |
Fax: |
86 311 66792059 |
E-mail: |
|
|
|
|